Category: Magazine Articles
-
PTEVIS Suspension Logger Mini-Project
As part of my Putting The EV in Seven project, I decided I needed a big detour into suspension travel on a Seven. That sounds like a good route to getting my project finished quickly, right? Well, it goes a bit like this. In a non-linear-timey-wimey sort of way of looking at the PTEVIS project,…
-
ELECTRIC VEHICLE COMPONENTS – YOUTUBE PTEVIS 2.2
This is the second of two explainer videos I’ve created to help YouTube viewers understand the concepts, terminology and physics of what’s going on in my Caterham Seven EV conversion. I’ve made these two videos so I can refer back to them in my progress videos and so I don’t need to explain each concept…
-
The Electric in Electric Vehicles – YOUTUBE PTEVIS 2.1
This is the first of two explainer videos I’ve created to help YouTube viewers understand the concepts, terminology and physics of what’s going on in my Caterham Seven EV conversion. I’ve made the videos so I don’t need to keep explaining each concept every time I mention it in a subsequent video and I’ll be…
-
3D Scanning My EV Conversion Project Car
Excuses, Excuses Ok… so… I’ve been distracted. Since starting this EV conversion project I’ve got a bit distracted by a couple of other projects. The first was the Caterham and Lotus Seven Club, in general and specifically the move to the new website. But I also found I was getting involved in way more other…
-
PMSM Motor Internals Video
As part of a larger explainer video I wanted to show how a Permanent Magnet Synchronous Motor Works. I wanted to show how the stator and rotor interacted with their respective magnetic fields and currents. The video shows how a simplified motor is constructed with a Stator and Rotor and then breaks those down to…
-
Finally a good Press-Stud Tool
This one’s as much a note for me so I know what I did to make this finally work. I’ve been looking for a decent way of fitting press-studs for things like boot covers. I’d tried the standard manual tap-and-hope tools that are supplied with the car and with SoftBitsForSevens kits. But that always seemed…
-
Putting the EV in sEVen – Youtube Project Kick-off
While I’ve been writing articles for the Caterham and Lost Seven Club’s Lowflying magazine, and doing a few Instagram and Facebook posts, I’ve not got around to creating the kick-off video for the Electric Seven Conversion project for Youtube, until now. I’m not really expecting this video to set the world alight, but it’s necessary…
-
Putting the EV in sEVen – Lowflying part 3 : EV Bits and Pieces
This article first appeared in the February edition of the Caterham and Lotus Seven Club’s Lowflying magazine. I also created an animated overview of all of this in this video below: A more detailed version of this video will be coming soon. And here’s the text of the article… Overview In this instalment, we’re going…
-
Lowflying February 2023 – Putting the EV in sEVen – EV Bits and Pieces
This is part 3, for the February 2023 issue of Lowflying, of a multi-part series of articles. An extended version of the Lowflying article can be found here.
-
Lowflying December 2022 – Putting the EV in sEVen – Conversion Trade-offs
Another article in Lowflying for December 2022. This is part 2 of a multi-part series and is a cut down version of this post: