Category: Upgrades
-
Build Session 28 : Boot – Floor, Fuel Filler Shroud and Carpets
Ok, so now I’m happy that the engine is running ok and the coolant system is doing its job for the moment. Now onto some more cosmetic stuff at the rear of the car. Boot Floor For such a well put-together kit that Caterham produce, the ply-wood boot floor jars a little. The cover for…
-
Build Session 27 : More Bleeding Coolant
It was going to be “back to the coolant system again” today. I had left the car at the point where we’d started the engine but were worried about the coolant temperature getting well over 100C, something like 105C. We then chickened-out, turned it off and decided to ask Derek. So I emailed Derek and…
-
Build Session 26 : Coolant Bleeding – Unproductive
After the euphoria and relief of getting the engine going yesterday we thought we’d have another look at what might be causing the coolant temperature to get so high. We only had an hour or so in the morning but couldn’t resist another look to see if we could find any obvious air-locks. Little did…
-
Build Session 25 : Main engine start!!!
It’s not that I’ve been terribly worried about the prospect of starting the engine… but… I certainly didn’t want to have missed something stupid and to then screw up a very expensive lump of aluminium and steel. Today I also had another pair of hands and a tripling of brain power on the project… my…
-
Build Session 24 : Two steps back and two steps forwards – IVA, Front Brakes, Headlamps and a trip to Caterham
After feeling quite pleased with my progress to date I’d got to the point of thinking about applying for an IVA test. From what I can tell the process goes like this: Fill out forms 1c and 4 Collect photos of build Get a copy of your invoice Submit two forms, photos and invoice through…
-
Build Session 23 : Harnesses, Seats and Silencer
An odds and ends day… but a big one… something to sit on! Having got the passenger compartment carpets installed is seemed only right to have a go at getting more of the finer things in life installed… harnesses and seats… Whoa we can move the seats out from the lounge! Transmission Tunnel Top I…
-
Build Session 22 : Scuttle Trim, Knee Trim Panels and Carpets
Whoa boy… you’re getting ahead of yourself! At the end of the last post I said it was time to start thinking about starting the car. I “could”… but… I’m still unhappy about putting fluids in the car and I clearly hadn’t quadruple checked the quadruple checking I’d been doing!… I need oil and water in…
-
Build Session 21 : A-Frame, Ears, Hubs, Discs, Callipers, Brake Pipes, Wheels
Another Sunday and today is a half day on the car. I was hoping to get the rear suspension all fitted and hopefully even get the wheels on! A-Frame Not much to this one. It’s a bit of a faff if you’re on your own though… the A-frame didn’t want to sit anywhere sensibly for…
-
Build Session 20 : Handbrake Again, De Dion Dry Run, De Deon Fit, Rear ARB, Flexible Rear Brake Pipe, Radius Arms
After time for reflection over night and some blog reading… Handbrake Cable… Again Having seen a couple of pictures on other people’s blogs, it was clear that the handbrake cable adjustment screws should be located in the clip on the RHS of the diff. I’m not sure what I was thinking that it stay in…
-
Build Session 19 : Earth Leads, Oil Catch, Handbrake Cable, Diff Oil, Prop Bolts and Drive Shafts
Another one of those bitty weeks. Not much time to really get my teeth stuck into anything but got a couple of odd jobs done. Earth Leads First off was a go at the battery earth leads…. There are three leads that I needed to take a look at: Battery to engine Chassis to engine…